Tag Archives: cybersecurity

Fintech Security & Compliance — Part 1

Fintech Security & Compliance — Part 1

image created using wordclouds

Fintech is one of the most happening sectors in India & world over with a wide array of services being delivered in lending, insurance, payments, stocks and mutual funds. While founders, product and engineering managers are busy in building the products and delivering them to the people in a rapid and scalable way, there is one huge challenge they must overcome. And that’s the Cyber Security aspect of it. I have had the opportunity to architect and implement controls around these requirements in the last few years and would like to share some thoughts here.

In India, Fintech regulators are:

  • Securities & Exchange Board of India (SEBI)
  • Reserve Bank of India (RBI)
  • Insurance Regulatory and Development Authority of India (IRDAI)

Each of these regulators have their own cybersecurity requirements and these span across multiple domains of cybersecurity like IT Governance, Information Security Audits (IS Audits), IT Outsourcing, IT Risk Management, Business Continuity Management (Good luck on a single region currently offered by the leading cloud vendor in India 🙂 ), Policies, Physical & Environment Security and etc

Apart from these, compliance with PCI DSS/PA DSS is a common requirement for all the fintechs handling credit card transactions. When it comes to PCI DSS, the magnitude of security requirements vary based on the volume of transactions. There are Four Merchant levels starting with Level 4 wherein a merchant handles 20,000 plus transactions and compliance requires that you fill a Self Assessment Questionnaire to Level 1 where 6 million plus transactions are handled annually. Level 2 and 1 have very comprehensive requirements to fulfil and are audited by a third-party.

Not all the Fintechs have the license to operate independently and they leverage the agreements with Banks/Financial institutions to offer the services. It would be surprising to know that banks themselves can offer most of the services which fintechs are offering. The key underlying factor here is Technology, which perhaps banks are yet to come to terms with. When it comes to security requirements and compliances, banks pass on these to the partnering fintechs. So multiple audits in a year are not unheard of in the fintech space.

RBI has Master Directions for entities operating in the banking/non-banking space covering Lending, Loans, Prepaid Payment Instruments, Non-Banking Finance Company (NBFC), Peer to Peer Lending companies, Full fledged banks, Payments Banks and so on.

IRDA has two two major cyber security requirements and one of them is meant exclusively for insurance offered on e-com channels like web/mobile/app channels called ISNP — Insurance Self Networking Platform. As most of the new-age insurance companies are ecom based, they are forced to comply with both (there is some overhead here).

IRDA’s requirement has a cybersecurity checklist with 307 controls and also mandates a Chief Information Security Officer (CISO) to be appointed by the insurance company! While these may be easier to implement for a legacy company with the monolithic architecture, startups usually find these difficult and herein lies the challenge.

SEBI’s framework for Stock Brokers and Depository participants is published here — What I found cool about SEBI’s directives on Cyber Security in comparison to RBI and IRDA is its forward looking approach and in sync with current demands and realities. For example they suggest using Bcrypt / PDKDF2 for hashing passwords, usage of passphrases vs complex passwords:

Also has a reference to Crypto Shredding, must confess I did not know such a terminology existed:

It makes me wonder if the major innovations in the fintech space in India is in the segment operated by the SEBI for reasons like these.

I am thinking of writing in detail about the challenges in complying with the security directives by the regulators in coming writeups but for now will focus on what this augurs for cybersecurity professionals in startups/fintechs.

There is going to be a huge demand for not just Developers, Product Managers, Architects, Data Scientists, but also Cyber Security professionals. When I say Cyber Security, it does not just limit to Pentesters / AppSec / Network / Cloud Security professionals. I see a demand for Data Privacy, Compliance and Legal folks who can understand, interpret complex regulations from the Regulators like RBI, SEBI & IRDA and help implement them in a creative, scalable and rapid way. I am currently working for an emerging Fintech company and a good chunk of my time is spent with the Legal team apart from the engineering folks in interpreting and helping fit newer technologies and controls around regulations, compliances, working on contracts, assessments, Third Party Risk management and etc

As a cyber security professional, I wouldn’t have expected to work this closely with the legal team, but no complaints and am beginning to see things from multiple perspectives! Remember that most startups live by the mantra:

“It is better to ask for forgiveness than permission”

At the end of the day, it’s all about solving problems.

If you have any questions, comments, feel free to post them here and I will try to answer them.

#fintech #cybersecurity #fintechsecurity #RBI #SEBI #IRDA #PCIDSS

Responding to AWS Abuse Alerts

If you have never received the dreaded AWS Abuse notifications on your cloud instances then you need not read the rest of the article 🙂

However, if you recently adopted AWS and received such a notice, then the following tips might come in handy.

  • Do not panic
  • To ensure you are NOT falling for any phishing campaign, please pay a close watch on the sending email addresses. AWS sends the abuse notices from the following email addresses:

Amazon EC2 Abuse <ec2-abuse@amazon.com>

  • The abuse notices are usually sent to the email addresses associated with Root account and to the email addresses that are explicitly added in alternate contacts in the settings page. Please ensure emails going to these addresses are monitored. If you have a multiple people that needs to be alerted, create a Distribution List and add them in alternate contacts of AWS Settings. The abuse reports clearly mentions the following details:
  • Instance IDs
  • Public IP address of instances involved in malicious behaviour
  • Ports and Protocols
  • Destination IP, Ports and URLs
  • Start Time and End Time (if it has indeed ended)
  • Type of malicious activity like port scan, crypto mining, bot behaviour
  • Read through the notice carefully, based on the notice you can figure out the type of the incident your instances are involved in
  • Note that AWS does not provide any technical support on these issues
  • First thing is to block inbound and outbound public connections to the reported host. You can use Security Group of the host for this. There would definitely be downtime of this host, so please know the repercussions
  • You might want to leave the access open to only whitelisted IP addresses to examine the host
  • If multiple hosts are involved, better to use Network ACL as its applied at the subnet level
  • Go through the logs, bash history, running services and processes. You can use netstat or lsof commands
  • You might have to preserve the instance for forensics purposes. Use shutdown rather than terminate. This article has good points with regards to forensics on AWS
  • Once you have taken the necessary remediation steps, do not forget to reply to the AWS team with the action you have taken (this is important)
  • A very important prerequisite for any Incident Response is solid logging setup. Make sure you have it set up for all the hosts. Cloudtrail provides valuable insight on API calls made.
  • Some challenges exist in a microservice architecture where hosts are transient, make sure all the nodes are configured properly for logging.
  • Leverage Open Source or commercial software for logging.
  • Highly recommended to run Network or Host based IDS. There are lot of open source solutions that you can deploy if cost is a concern. Ex: OSSEC, Wazuh (OSSEC fork),

I have collated some of the notices that I handled first-hand as part of my consulting and some sourced through friends. Typical notices are as follows:

Example 1:

“Dear Amazon EC2 Customer,

We’ve received a report that your instance(s):

Instance Id: xxxxx

IP Address: xx.xx.xx.xx

has been placing spam (unsolicited messages, typically advertisements) on websites hosting online discussions, such as Internet forums; check the information provided below by the abuse reporter.

This is specifically forbidden in our User Agreement: http://aws.amazon.com/agreement/

Please confirm that all necessary steps to cease this activity have been taken on your side and reply this email to send your reply of action to the original abuse reporter. This will activate a flag in our ticketing system, letting us know that you have acknowledged receipt of this email.

It’s possible that your environment has been compromised by an external attacker. It remains your responsibility to ensure that your instances and all applications are secured. The link http://developer.amazonwebservices.com/connect/entry.jspa?externalID=1233

provides some suggestions for securing your instances.

Case number: xxxxxxxxxxxx

Additional abuse report information provided by original abuse reporter:

* Destination IPs:

* Destination Ports:

* Destination URLs:

* Abuse Time: Wed Sep 30 14:39:00 UTC

* Log Extract:

<<<

Reported-From:

Category: abuse

Report-Type: regbot

Service: regbot

>>>

* Comments:

Probable Cause & Response:

Improper configuration of Apache web server. Someone forgot to turn off the Proxy Requests ON causing random people to connect and send spam. Required us to dig through the logs, check running services and processes.

Remember it only takes a small window of time for a malicious user to discover and exploit vulnerabilities. Strongly recommend having a Host Based IDS like OSSEC on each of the servers even if they are not publicly exposed

Example 2:

Hello,

We’ve received a report(s) that your AWS resource(s)

EC2 Instance Id: i-0xxxxxxxxx

[IP Address]

has been implicated in activity which resembles scanning remote hosts on the internet for security vulnerabilities. Activity of this nature is forbidden in the AWS Acceptable Use Policy (https://aws.amazon.com/aup/). We’ve included the original report below for your review.

Please take action to stop the reported activity and reply directly to this email with details of the corrective actions you have taken. If you do not consider the activity described in these reports to be abusive, please reply to this email with details of your use case.

If you’re unaware of this activity, it’s possible that your environment has been compromised by an external attacker, or a vulnerability is allowing your machine to be used in a way that it was not intended.

We are unable to assist you with troubleshooting or technical inquiries. However, for guidance on securing your instance, we recommend reviewing the following resources:

Please remember that you are responsible for ensuring that your instances and all applications are properly secured. If you require any further information to assist you in identifying or rectifying this issue, please let us know in a direct reply to this message.

Regards,

AWS Abuse

Abuse Case Number: xxxxxxxx

— -Beginning of forwarded report(s) — -

* Log Extract:

<<<

— — — — — — — — — — — — — –

AWS Account: xxxxxxxxx

Report begin time: 29-Apr-2016 08:11:37 UTC

Report end time: 29-Apr-2016 08:12:35 UTC

Protocol: TCP

Remote IP: xx.xxx.xx.xx

Remote port(s): multiple ports (1505 ports in total)

Total bytes sent: 61200

Total packets sent: 1530

Total bytes received: 0

Total packets received: 0

>>>

* Comments:

<<<

>>>

Probable Cause & Response:

In this case, someone indeed forgot to take prior approval while carrying out port scanning. This could also occur if a malicious user or malware was trying to scan public servers as part of reconnaissance

NOTE: A few days back AWS waived off prior requirement of taking approval from AWS for pentesting

Example 3:

This was not AWS Abuse report 🙂 but I just added to to create some awareness

A friend of mine called up stating that his company’s AWS account was hacked. Though he mentioned that they had changed the root account password, there was a spike in the number of instances being spun/spinned up and his boss’s credit card was charged for 1.5 lakhs INR (about 2000$).

Apparently they were using the root account for operations and had not created different user accounts, forget about IAM roles!

As soon as I instructed them to revoke the AWS API Keys, the spike in usage dropped and meanwhile they were busy talking to the credit card company for a refund/chargeback. Ofcourse it was a costly lesson for them for not using the best practices of MFA, using separate accounts, roles and etc

A good practice would be to list down all the assets based on region in a simple spreadsheet. This can come in handy when responding to notices especially if you are using different regions in AWS. There are some good open source as well as commercial tools that will help you effectively manage security posture of your AWS environment. I will probably write a detailed article on using some of these but if you can check out following tools:

  • Scout Suite
  • Trusted Advisor Reports (You get exhaustive report with Business Support)
  • Nessus — Cloud configuration audits

A couple of months back AWS also released steps on automating responses to abuse alerts. I haven’t tried this yet and will share my experience once done. You can read about it here:

Found this useful? buymeacoffee.com/prax